b. Signal value measurement:
After the house layout is edited and saved, you can measure the signal
coverage. Move the router icon to the actual placement position in your
house, touch START TEST (if the test has been performed, touch TEST AGAIN
again), and drag the location icon to the test position, and touch GET
SIGNAL. After measuring the signal of each room as prompted, touch
GENERATE HEAT MAP. The closer the color is to red, the stronger the signal.
HUAWEI_WIFI_AX2
HUAWEI_WIFI_AX2
26 How do I use the HUAWEI router's smart
diagnosis function in the AI Life App
Issue 01 (2022-02-18) Copyright © Huawei Technologies Co., Ltd. 93
To Next Page
Loading...
