Husky Altanium Matrix5 User Manual

Event History Screen 99
User Guide v 1.0 — February 2020 Heat the Mold
The information on the Event History screen is described in Table 9-4.
Figure 9-2 Event History Screen
1. Filter Button 2. Card Layout Screen Button
Table 9-4 Event History Screen Information
Item Description
Number of Events This number shows how many events are listed on the Event History
screen.
Filter Lets you select the type of events shown on the Event History screen. The
event types include:
• Zone Alarms (active and inactive)
• Alarms (active and inactive)
• Warnings (active and inactive)
• Setpoint Changes
• Setup (changes)
• HMI Startup
• Out of Specification (events)
Date/Time The date and time that the event was triggered.
Source The cause of the event.
Description The description of the event.
Mold Shows the mold that is related with the mold setup that was loaded
when the event occurred.
Mold Setup Shows the mold setup that was loaded when the event occurred.

Husky Altanium Matrix5 Specifications

General

Brand	Husky
Model	Altanium Matrix5
Category	Controller
Language	English