Need help?Do you have a question about the Hydac FCU 1310 and is the answer not in the manual?
Explanation of warning symbols used to indicate hazards to persons or property.
Definitions of signal words (DANGER, WARNING, CAUTION, NOTICE) and their risk levels.
Defines the intended application and responsibilities for the product's use.
Details hazardous situations and product damage from incorrect operation.
Specifies required knowledge and training for different user roles.
Procedure for stopping the device in an emergency situation.
Overview of the FCU's functions for measuring contamination, temperature, and water saturation.
Explanation of the light blockade measurement principle for particle detection.
Description of the internal components and fluid path of the FCU.
Identification and description of the FCU's displays, buttons, and interfaces.
Steps for electrically connecting the FCU to a 24 V DC power supply.
Guidance on connecting and detaching the FCU's return hose.
Criteria for choosing an appropriate location for taking fluid samples.
Specific procedures and warnings for measuring at pressures up to 45 bar.
Procedures and warnings for measuring in the 5 to 345 bar pressure range.
Connecting the FCU to a PC using the CSI-B-2 kit for data transfer.
Copying measurements to a USB memory stick and formatting requirements.
Procedure for flushing the FCU with cleaned mineral oil after use.
Steps for checking and cleaning the suction strainer to maintain flow.
Guidance on verifying measurement accuracy using the FieldVerification Kit.
Explanation of warning symbols used to indicate hazards to persons or property.
Definitions of signal words (DANGER, WARNING, CAUTION, NOTICE) and their risk levels.
Defines the intended application and responsibilities for the product's use.
Details hazardous situations and product damage from incorrect operation.
Specifies required knowledge and training for different user roles.
Procedure for stopping the device in an emergency situation.
Overview of the FCU's functions for measuring contamination, temperature, and water saturation.
Explanation of the light blockade measurement principle for particle detection.
Description of the internal components and fluid path of the FCU.
Identification and description of the FCU's displays, buttons, and interfaces.
Steps for electrically connecting the FCU to a 24 V DC power supply.
Guidance on connecting and detaching the FCU's return hose.
Criteria for choosing an appropriate location for taking fluid samples.
Specific procedures and warnings for measuring at pressures up to 45 bar.
Procedures and warnings for measuring in the 5 to 345 bar pressure range.
Connecting the FCU to a PC using the CSI-B-2 kit for data transfer.
Copying measurements to a USB memory stick and formatting requirements.
Procedure for flushing the FCU with cleaned mineral oil after use.
Steps for checking and cleaning the suction strainer to maintain flow.
Guidance on verifying measurement accuracy using the FieldVerification Kit.
General| Brand | Hydac |
|---|---|
| Model | FCU 1310 |
| Category | Controller |
| Language | English |
To Next Page