Improper Use or Use Deviating from Intended Use
DANGER
Hazard due to use of the product other than
that intended
Bodily injury and damage to property will result
when operated improperly.
► Never operate the product in potentially
explosive atmospheres.
► Only use the product with permissible media.
Any use extending beyond this or deviating therefrom shall not be considered
intended use. HYDAC FILTER SYSTEMS GmbH will assume no liability for
any damage resulting from such use. The user alone, shall assume any and
all associated risk.
Improper use may result in hazards and/or will damage the product.
Examples of improper use:
• Operation with fluid that has a flash point under 55°C / 131°F.
• Flush with universal thinners or other degreasing fluids
• Operation in potentially explosive atmospheres.
• Operation under non-approved operational conditions.
• Modifications to the product made by the user or purchaser.
• Continuous monitoring of the fluid cleanliness (continuous operation)
• Improper connection of the pressure and return flow hoses.
• Operation at a measurement point with impermissible pressure.
• Operation on 24 V DC on-board networks without central
"Load Dump" fuse.
• Operation with an impermissible fluid.
• Operation with faulty or damaged hoses.
• Operation with damaged connector cable.
FCU1310
en(us)
Page 15 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27
To Next Page
Loading...