Hydac FCU 1310 - Delete Memory; Set Measuring Time

Select operating level / configuration menu
- Delete memory
With , you permanently delete all of the measurement records in
the internal memory.
Before deletion, back up all of the measurement records on the USB
memory stick.
Push the following buttons to:
Confirm deletion
Cancel and back
- Set measuring time
Under you set the duration of the measurement. Select the
duration in the range from 10 to 300 seconds.
Use the following buttons to set the
duration of the measurement:
To change the
value
To change digit
To confirm the
change
Cancel and back
The factory setting is:
FCU1310
en(us)
Page 58 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27