Hydac FCU 1310 - Measurement Method Selection

Preparing the FCU for measurement
Select the measurement method according to the pressure involved
After you have selected the measurement location according to the above-
mentioned criteria, determine what the operating pressure is at that location.
Select the measurement method that is suitable for the pressure at the
measurement point:
Pressure at the
measurement
point
Measurement method
Details
are on
page
0 bar /
0 psi
Measuring from unpressurized containers
47
1 - 45 bar /
14 - 650 psi
Measuring up to max. 45 bar / 650 psi
40
15 - 345 bar /
217 - 5000 psi
Measuring in the range 5 to 345 bar /
217 to 5000 psi
43
FCU1310
en(us)
Page 39 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27