Displaying measured variables
The measurements provide you with information about the purity of the oil in
the system concerned. The measurement variables are calibrated. They
indicate a measured value with an accuracy of +/- 1/2 ISO codes.
" " measured variable
The measurement value is updated
independently of the set measuring time.
Display of the 3-digit ISO code.
Example: ISO code 20.18.15
" " measured variable
The measurement value is updated
independently of the set measuring time.
Display of a channel in the SAE class.
Example: SAE class, channel A = 6.1
" " measured variable
The measurement value is updated
independently of the set measuring time.
Display of a channel in the NAS class.
Example: NAS class, channel 15-25 =
13.2 µm
" " measured variable
The integrated AquaSensor continuously
measures the saturation. The measured
value is shown on the display as the
water saturation of the fluid, expressed as
percentage saturation.
Example: 19.3% water saturation
" " measured variable
FCU1310
en(us)
Page 53 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27
To Next Page
Loading...