Hydac FCU 1310 - Evaluating Measurement Records

Evaluating measurement records
Evaluating measurement records
The measurement records read out of the FCU and stored on the USB
memory stick are defined as follows:
Measurement record directories according to measurement point
If measurements are stored under a measurement point , the FCU
automatically produces a directory for this measurement point and puts the
measurement records there.
Measurement report file names
The file names of the measurement records consist of date YY -> year, MM -
> month, DD -> day, as well as a incremental number.
09
_
02
_
05
.
026
YY
_
MM
_
DD
.
incremental number
A new record is created:
• On request by
• After a restart of the FCU (see page 103)
• After the measured data is downloaded to the USB memory stick
For each new record, the incremental number is increased by one.
FCU1310
en(us)
Page 77 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27