Hydac FCU 1310 - Product Capabilities and Operation; What the FCU Measures

What can the product do?
What can the product do?
The FluidControl Unit FCU is a portable service unit for taking short-term
measurements of the solid particle contamination, temperature und %
saturation level in hydraulic systems.
Knowledge on the level and amount of contamination allows you to check
and document quality standards and introduce the required optimization
measures.
The integrated pump and the hoses supplied enable usage with:
• Control circuits
• Pressure circuits
• Depressurised containers
The internal data memory enables measurements to be recorded together
with a time-stamp.
The USB interface can be used to copy all measurements to a USB memory
stick or to send them to a mobile device via Bluetooth where they can be
analyzed using MS Excel or the Fluid Monitoring software FluMoS.
Additional features include:
• Optical measurement of the degree of solid particle contamination
• Capacitive recording of the water saturation in %
• Resistive measurement of the temperature
• Suitable for hydraulic fluids (up to ISO VG 68)
10 - 350 mm
²
/s / 16 - 1622 Sus
• Automatic measurement and display of cleanliness ratings in
accordance with:
• ISO 4406:1987; NAS 1638
• ISO 4406:1999; SAE AS 4059 (D)
• Measurement accuracy +/- ½ ISO code in the calibrated range
• Supply voltage of 24 V DC / 4 A for operation on mobile machine on-
board networks
• Network adapter 90 - 240 V AC / 24 V DC 5 A included in the scope of
delivery
• Operating pressure without high-pressure adapter max. 45 bar / max.
650 psi,
Operating pressure with high-pressure adapter max. 345 bar / max.
5000 psi
• Integrated pump for the automatic control of oil flow
FCU1310
en(us)
Page 24 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27