Hydac FCU 1310 - Connecting FCU with HMG 510; HMG 3000; 4000

Reading internal measurement memory
Connecting FCU with HMG 510 / HMG 3000 / 4000
The following portable data recorders (HMG) can be used to give a readout
of the FCU via the DATA interface:
- HMG 510 (with firmware version 2, release 15 or higher)
- HMG 3000 (with firmware version 2, release 1 or higher)
For further details, see the operating instructions for the HMG.
FCU1310
en(us)
Page 70 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27