Hydac FCU 1310 - Navigating the Display Menus

124 pages

Save Page as PDF

To Next Page

To Previous Page

FCUoperating

Clicking through the display

According to the calibration type ( ) in the Power up menu, the

following displays can be clicked through with the buttons.

- Display

Display

Description

3-digit ISO code

SAE Class A

SAE Class B

SAE Class C

SAE Class D

SAE Max.

Flow status

LED current in %

FCU1310

en(us)

Page 51 / 124

BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27

Main Page

Imprint2
Documentation Representative2
- Table of Contents3
Content3
What's New - Changes to the Manual7
Preface8
- Technical Support8
- Modifications to the Product8
- Warranty8
- Using the Documentation9
Safety Information10
- Hazard Symbols10
- Signal Words and Their Meaning in the Safety Information and Instructions11
- Structure of the Safety Information and Instructions12
- Observe Regulatory Information12
- Proper/Designated Use13
  - Periodic Intermittent Duty - Operating Mode S3, (as Per DIN en 60034-1 / DIN VDE 0530, Part 1)14
- Improper Use or Use Deviating from Intended Use15
- Qualifications of Personnel / Target Group16
- Wear Personal Protection Equipment17
- Stoppage in an Emergency (EMERGENCY STOP)17
Fcuopening/Closing18
Fcutransporting19
Fcustoring20
Decoding the Model Code Label21
Checking the Scope of Delivery23
What Can the Product Do24
- Counting Contaminant Particles25
- How the Product Works27
- Overview of Control Panel/Operating Elements28
- Dimensions29
- Hydraulic Diagram30
Using the Batterypack (Accessory)31
Preparing the FCU for Measurement36
- Connecting/Disconnecting the FCU Electrically36
- Plug In/Detach Return Hose37
- Selecting the Measurement Location38
- Select the Measurement Method According to the Pressure Involved39
- Measuring up to Max. 45 Bar / 650 Psi40
- Measuring in the Range 5 to 345 Bar / 217 to 5000 Psi43
- Measuring from Unpressurized Containers47
Fcuoperating49
- Display and Keypad Elements49
- Clicking through the Display51
  - Display51
  - Display52
- Displaying Measured Variables53
  - Measured Variable53
- Display Service Variables54
  - Service Variable54
Select Operating Level / Configuration Menu55
- Operate / Set up Menu56
- Operating/Setting Measuring Menu61
Performing Measurements67
Reading Internal Measurement Memory68
- Read out Measured Values Via DATA Interface69
- Reading out USB Interface Measured Values71
  - Copying Measurements Onto a USB Data Stick71
    - Data Transmission Failed74
- Reading out Measured Values Via Bluetooth Interface75
  - Installing the Bluetooth USB Adaptor76
    - Guarantee and Liability for the USB Adapter76
  - Connecting/Linking the FCU Via Bluetooth76
Evaluating Measurement Records77
- Measurement Record Directories According to Measurement Point77
- Measurement Report File Names77
- Opening Measurement Reports78
  - The Measurements Are Shown as Dates80
Evaluating/Reading Measurement Reports with Flumos82
Preparing the FCU for Transport83
Performing Maintenance87
- Fcucleaning87
- FCU Flushing88
- Clean the Suction Strainer92
- Checking the High Pressure Adapter96
  - Cleaning / Changing the Strainer in the High Pressure Adapter97
  - Cleaning / Changing the Strainer in the High Pressure Adapter98
Identifying and Interpreting Status/Error Messages99
Restarting/Resetting103
Taking the FCU out of Operation103
- Shutting down the FCU103
- Fcudisposing103
Locating Spare Parts104
- Selecting Accessories105
Checking the Measuring Accuracy107
- Fcucalibrating107
Technical Data108
Appendix110
- Model Code110
- Finding Customer Service / Service Stations111
- Factory Default Settings112
- Overview / Definition of the Cleanliness Classes113
- EC Declaration of Conformity119
- Explanation of Terms and Abbreviations121
- Index122

Hydac FCU 1310 - Navigating the Display Menus

Table of Contents