Hydac FCU 1310 - Using the Batterypack (Accessory)

Using the BatteryPack (accessory)
Using the BatteryPack (accessory)
With the BatteryPack, which is available as an accessory, you can make the
FCU independent of the electrical supply network.
For technical details on the BatteryPack, see its instruction brochure.
With the locking pin (2), the
BatteryPack (1) is held securely in the
mounting rails (3) during transport.
For operation with the BatteryPack, fit the connector into the socket labeled
DC IN of the FCU.
FCU1310
en(us)
Page 31 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27