Hydac FCU 1310 - Page 79

Evaluating measurement records
The " " status can take the following values:
Error
code
Description
0
Ready
=>
Sensor / equipment is working.
2
Minor fault / WARNING
=>
Sensor / equipment continues to
work.
WARNING is automatically reset by
the FCU.
3
Moderate fault
=>
Sensor / equipment status us
"fault".
Restart the FCU by switching it off
and then on again.
4
Serious fault
=>
The sensor or equipment is faulty.
Contact the HYDAC Service
department.
See page 99 for more information about the individual faults.
The values for SAE A-D or NAS 2-25 as well as the temperature units are
defined by the FCU settings.
FCU1310
en(us)
Page 79 / 124
BeWa FCU1310 V300 3371346f en-us 2017-01-27.docx 2017-01-27