2.1 Precautions for transportation
2-2
2. Installation
[Handling after unpacking]
● Hold the base part when you carry the unit.
● Do not carry the unit by its motor cover or stainless steel sheet.
● Do not damage or drop the package during transportation.
● Do not apply excessive force to any part of the actuator.
→For the names of each part, refer to "Names of the Parts" on page Intro-11, 12.
[Handling when assembled into machinery (system)]
● Fix the slider so they would not accidently move during transportation.
● If the actuator or any moving part is overhanging, fix it appropriately to avoid large wobbles due to
external vibration.
When transporting without fixing the tip, do not apply impact of 0.3G or more.
● When suspending machinery (system) with ropes, be careful not to catch the rope on the actuator
or cable.
To Next Page
Loading...
