IAI ROBO Cylinder RCS4- SA4C User Manual

4.5 Greasing method
4-8
4. Maintenance and Inspection
4.5 Greasing method
[1] Grease used: Use an equivalent product
~ Standard Type: Except for Lead 30 in SA6, Lead 36 in SA7 or Lead 48 in SA8
Application
location
During maintenance
(recommended product)
Default (reference)
Ball screw
Kyodo Yushi/Multemp LRL No.3 Kyodo Yushi/Multemp LRL No.3
Guide
Caution
Never use fluorine-based grease and urea-based grease.
Mixing with lithium-based grease not only reduces the performance of the grease, it
may even cause damage to the actuator.
~ Standard Type: Lead 30 in SA6, Lead 36 in SA7 and Lead 48 in SA8
Application
location
During maintenance
(recommended product)
Default (reference)
Ball screw
Kyodo Yushi/Multemp ET-R No.2 Kyodo Yushi/Multemp ET-R No.2
Guide
Caution
Never use lithium-based grease and fluorine-based grease.
Mixing with urea-based grease not only reduces the performance of the grease, it
may even cause damage to the actuator.

IAI ROBO Cylinder RCS4- SA4C Specifications

General

Brand	IAI
Model	ROBO Cylinder RCS4- SA4C
Category	Controller
Language	English