Table 13. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
4000001f-00000000 Please ensure that
the IMM is flashed
with the correct
firmware. The IMM
is unable to match
its firmware to the
server.
Error The server does
not support the
installed IMM
firmware version.
Update the IMM firmware to a version
that the server supports.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the device
is part of a cluster solution, verify that
the latest level of code is supported for
the cluster solution before you update
the code.
4000002a-00000000 [arg1] Firmware
mismatch internal to
system [arg2]. Please
attempt to flash the
[arg3] firmware.
Error This message is for
the use case where
a specific type of
firmware mismatch
has been detected.
No action; information only.
4000002b-00000000 Domain name set to
[arg1].
Info Domain name set
by user.
No action; information only.
4000002c-00000000 Domain Source
changed to [arg1] by
user [arg2].
Info Domain source
changed by user.
No action; information only.
4000002d-00000000 DDNS setting
changed to [arg1] by
user [arg2].
Info DDNS setting
changed by user.
No action; information only.
4000002e-00000000 DDNS registration
successful. The
domain name is
[arg1].
Info DDNS registration
and values.
No action; information only.
4000002f-00000000 IPv6 enabled by user
[arg1].
Info IPv6 protocol is
enabled by user.
No action; information only.
40000020-00000000 IMM reset was
caused by restoring
default values.
Info The IMM has been
reset because a
user has restored
the configuration
to its default
settings.
No action; information only.
40000021-00000000 IMM clock has been
set from NTP server
%1.(%1 =
IBM_NTPService.ElementName)
Info The IMM clock has
been set to the date
and time that is
provided by the
Network Time
Protocol server.
No action; information only.
182 System x3530 M4 Type 7160: Installation and Service Guide