Table 13. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000022-00000000 SSL data in the IMM
configuration data is
invalid. Clearing
configuration data
region and disabling
SSL+H25.
Error There is a problem
with the certificate
that has been
imported into the
IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated through
the Generate a
New Key and
Certificate Signing
Request link.
1. Make sure that the certificate that
you are importing is correct.
2. Try to import the certificate again.
40000023-00000000 Flash of %1 from %2
succeeded for user
%3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or
LegacyCLI; %3 =
user ID)
Info A user has
successfully
updated one of the
following firmware
components:
v IMM main
application
v IMM boot ROM
v Server firmware
(UEFI)
v Diagnostics
v System power
backplane
v Remote
expansion
enclosure power
backplane
v Integrated
service processor
v Remote
expansion
enclosure
processor
No action; information only.
40000024-00000000 Flash of %1 from %2
failed for user
%3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or
LegacyCLI; %3 =
user ID)
Info An attempt to
update a firmware
component from
the interface and
IP address has
failed.
Try to update the firmware again.
Chapter 4. Troubleshooting 183
To Next Page
Loading...
Need help?
General