2. When you replace the system board, you must either update the server with the
latest firmware or restore the pre-existing firmware that the customer provides
on a diskette or CD image. Make sure that you have the latest firmware or a
copy of the pre-existing firmware before you proceed. See “Updating the
firmware” on page 297, “Updating the Universal Unique Identifier (UUID)” on
page 315, and “Updating the DMI/SMBIOS data” on page 317 for more
information.
Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest
level of code is supported for the cluster solution before you update the code.
3. Update the vital product data (VPD) through the server firmware update
procedure.
4. If you see the error message Non-compatible/non-supported CPU, see PDSG
for more information appears, the microprocessor that you installed is not
supported. See Chapter 4, “Parts listing, Type 7915 server,” on page 179 for a
list of supported microprocessors.
Chapter 5. Removing and replacing server components 293
To Next Page
Loading...
