Chapter 3
Calibration, Configuration, and Special Operations
3-36
To select or delete a custom cable type:
1. Press both and keys at the same time, or select located on
the DH Ready screen. The Cable Type screen appears.
2. Press the Arrow Key to
highlight the Custom Cable
type.
3. Press Enter to open the
Custom Cable screen.
4. The tester displays all currently
stored custom cable types.
5. Position the cursor over the
desired custom cable type.
6. Press Enter to make the
custom cable you highlighted
the new cable type or select
to delete the selected
custom cable type.
To Next Page
Loading...
Need help?
General