PPC-5190 Flat Panel PC
Page 44
3.1 Installation Precautions
When installing the PPC-5190, please follow the precautions listed below:
Turn power off: When installing the PPC-5190 make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers: Only certified engineers should install and modify
on-board functions.
Mounting: The PPC-5190 is a heavy device. When mounting the system onto
a rack, panel, wall or arm please make sure that at least two people are
assisting with the procedure.
Anti-static Discharge: If a user open the rear panel of the PPC-5190, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.2 Preinstalled Components
The following components are all preinstalled.
Motherboard
19” TFT LCD
19” Touch screen (T-R model only)
Power switch
Power supply
Inverter board
PCI riser card
System cooling fans
Preinstalled OEM customizations may include the following.
CPU
HDD
FDD
CD drive
DIMM
To Next Page
Loading...
Need help?
General