PPC-5190 Flat Panel PC
Page 90
P-ATA&S-ATA
The hard drive interfaces are configured as P-ATA and
S-ATA.
S-ATA Running Enhanced Mode [Yes]
Use S-ATA Running Enhanced Mode option to select whether the S-ATA interface is
running in enhanced mode or legacy mode.
Yes DEFAULT
The S-ATA interface is running in enhanced mode.
No
The S-ATA interface is running in legacy mode.
P-ATA Channel Selection [Both]
Use P-ATA Channel Selection option to select the active IDE channels.
Primary
The primary P-ATA channel is set to be the active IDE
channel.
Secondary
The secondary P-ATA channel is set to be the active
IDE channel.
Both DEFAULT
The primary and secondary P-ATA channel are both
set to be the active IDE channels.
S-ATA Ports Definition [PO-3
rd
./P1-4
th
.]
Use S-ATA Ports Definition option to select the physical ports for S-ATA.
PO-3rd./P1-4th. DEFAULT
Set the physical ports (PO/PI) to be 3
rd
./4
th
.
PO-4th. /P1-3rd.
Set the physical ports (PO/PI) to be 4
th
./3
rd
.
To Next Page
Loading...
Need help?
General