PPC-5190 Flat Panel PC
Page 98
5.3.4 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 7) to set or change the configurations
for the FDD controllers, parallel ports and serial ports.
BIOS Menu 7: Super IO Configuration
On Board Floppy Controller [Enabled]
Disabled
Allows BIOS to disable the floppy controller
Enabled DEFAULT
Allows BIOS to enable the floppy controller
Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Disabled
No base address is assigned to Serial Port 1
To Next Page
Loading...
Need help?
General