Imation RDX A8 - Email Notification Settings

42
RDX A8 User and Service Guide — Version 1.0
vii. Notification settings
E-Mail Notification allows the user to configure the RDX A8 to send email to a selected account upon
an identified level of system event.
The Notification tab has the following fields:
Enable E-mail notification:
This check box will enable The Email Notification action, and will allow the user to configure the
email parameters.
Figure 27—RDX A8 Manager Configure Notification
Notification Filter:
Select from four classes of notification as follows:
Critical Events:
Notified whenever severe errors requiring operator intervention to resolve occur,
or when a hardware failure is detected.
Critical and Warning Events:
Notified whenever any Critical events occur, as well as Warning events which indicate error
conditions such as incorrect format cartridges for the selected operation mode, etc.
Critical, Warning and Configuration Events:
Notified whenever any Critical or Warning events occur, as well as Configuration events which
indicate changes in unit configuration, operating mode, addition of users, etc.
Critical, Warning, Configuration and Informational Events:
Notified whenever any Critical, Warning, or Configuration Events occur, as well as any
Information events which indicate monitoring normal operations.