45
RDX A8 User and Service Guide — Version 1.0
Restore Configuration:
This function allows a user to restore a previous user saved configuration. The file may be located by
selecting the “Browse” button within the “Restore Configuration” tab.
Reset Configuration:
This function restores all factory default settings, including resetting default passwords, IP addressing,
and operating modes. Depending on network settings resetting defaults may cause loss of communication
with the unit or require you to adjust network settings to regain access to the unit.
NOTICE
Reset configuration may also be accomplished by using a paper
clip and depressing the “Hard reset port” switch for 3 seconds
then releasing.
See Page 10 for location of the hard reset switch on the
rear panel of the unit.
To Next Page
Loading...
