Why does my Immergas Boiler frequently trip the overheating safety device?
If your Immergas Boiler frequently trips the overheating safety device, it could be due to a lack of water in the appliance, poor water circulation, or a blocked pump. Ensure the system pressure is within established limits by checking the pressure gauge. Also, verify that the radiator valves are open and that the pump is functioning correctly.
What to do if my Immergas Boiler has repeated ignition blocks?
Repeated ignition blocks in your Immergas Boiler can occur due to several reasons. First, check that there is gas pressure in the network and that the gas adduction valve is open. Second, restore the function of the condensate drain, ensuring that condensate hasn't affected combustion components, the fan, or the gas valve. Lastly, check the function of the condensate sensor.
How to fix irregular combustion or noisiness in Immergas VICTRIX EXTRA 12 PLUS Boiler?
Irregular combustion or noisiness in your Immergas Boiler can be caused by a dirty burner, a clogged primary heat exchanger, incorrect combustion parameters, or an incorrectly installed intake-exhaust terminal. Check these components to resolve the issue.
To Next Page
General