90
INSTALLER
USERMAINTENANCE TECHNICIAN
TECHNICAL DATA
MODEINFORESET
+
-
+
-
59
Once the function is activated, 'tA' and 'MA/AC/Mi' plus the sym-
bol (
) ashing on the screen will then appear.
MODEINFORESET
+
-
+
-
60
Once the function is activated, the service symbol (
) will start
ashing. e digits on the le will display "tA" while those on the
right will display the ow temperature alternating with the indi-
cation (MA, AC, Mi) of the current phase, depending on the pro-
gress of the calibration. e ashing (
) or ( ) symbols indi-
cate on which circuit the energy produced during calibration is
being dissipated. Pressing the Reset button allows you to exit the
function in advance.
e calibration function ends automatically by returning the appliance to the state it was in before it was activated.
No interaction with the device is necessary: the function is fully automatic.
To Next Page
Loading...
