Electrical and power specifications
Environmental and mechanical specifications
Variant PLU-1/48 PLU-5/48 PLU-8/48
Ambient air
temperature
-40 ºC to +50 ºC (operating)full current
+50 ºC to +100 ºC (operating)current derating
-50 ºC to -40ºC and 100ºC to +125 ºC (non-operating)
Maximum
humidity
5% - 85% (non-condensing)
Dimensions 60 mm x 60 mm x 15 mm
Weight (exc.
mating
connectors)
35 g
Hardware revisions
Hardware
revision*
Description and changes
1.0.1R First product release.
1.1.0R Changes from previous version:
CAN connector change from 4 ways to 3 ways (Phoenix Contact 1937509). PE pin is
removed from connector. PE connection should be made with the plated mounting
holes
CAN LEDs position change
Supply connector change from 4 ways to 3 ways (Phoenix Contact 1937509). PE pin is
removed from connector. PE connection should be made with the plated mounting
holes
IO connector change TE Micro-Match model 8-188275-6. Same pinout except 1
change: +5.0 V output is added at pin 16. (Version 1.0.1 had this pin connected to
GND)
Feedback connector change to TE Micro-Match model 8-188275-2. Pinout remains
identical to version 1.0.1R
Increased USB port electrical robustness and noise immunity
Readjusted power stage elements to minimize electromagnetic emissions
To Next Page
Loading...