Intel Agilex User Manual

You can now remove the current or new application image address image pointer entry by writing the value to
0x00000000 using the QSPI_write_one_word function as shown in the following example. The
QSPI_write_one_word function takes address and data arguments. Be sure to erase the application content that you
just removed from flash memory.
You can use a QSPI_read to the image pointer entry at offset 0x28 for CBP0 and CPB1 to verify completion of the
QSPI_write_one_word commands .
4. Remote System Update (RSU)
UG-20205 | 2019.10.09
Intel
®
Agilex
™
Configuration User Guide
Send Feedback
178

Intel Agilex Specifications

General

Brand	Intel
Model	Agilex
Category	Microcontrollers
Language	English