4.6.2. Creating Initial Flash Image Containing Bitstreams for Factory Image and One Application
Image
1. On the File menu, click Programming File Generator.
2. Select Intel Agilex from the Device family drop-down list.
3. Select the configuration mode from the Configuration mode drop-down list. The current Intel Quartus Prime Software
only supports remote system update feature in Active Serial x4.
4. On the Output Files tab, assign the output directory and file name.
5. Select the output file type.
Select the following file types for the Active Serial (AS) x4 configuration mode:
•
JTAG Indirect Configuration File (.jic)
•
Memory Map File (.map)
•
Raw Programming File (.rpd). Generating the .rpd file is optional.
4. Remote System Update (RSU)
UG-20205 | 2019.10.09
Send Feedback
Intel
®
Agilex
™
Configuration User Guide
161
To Next Page
Loading...
