3.1.1. Avalon-ST Configuration Scheme Hardware Components and File Types
You can use the following components to implement the Avalon-ST configuration scheme:
• A CPLD with PFL II IP and common flash interface (CFI) flash or Quad SPI flash memory
• A custom host, typically a microprocessor, with any external memory
• The Intel FPGA Download Cable II to connect the Intel Quartus Prime Programmer to the PCB.
The following block diagram illustrates the components and design flow using the Avalon-ST configuration scheme.
Figure 11. Components and Design Flow for .pof Programming
Quartus Software flow on PC
Quartus Prime
Programmer
10 pin JTAG header
Intel FPGA Download Cable II
CFI
Intel FPGA
SDM
Flash
PCB
Quartus Prime:
File Programming File Generator
Quartus Prime:
File Start Compile
Quartus Prime:
Tools Programming
Quartus Prime
Programming File
Generator
Quartus Prime
Compilation
USB
CPLD with
PFL II
Avalon-ST
SOF
POF
3. Intel Agilex Configuration Schemes
UG-20205 | 2019.10.09
Send Feedback
Intel
®
Agilex
™
Configuration User Guide
43