3.2.3. AS Using Multiple Serial Flash Devices
Intel Agilex devices support one AS x4 flash memory device for AS configuration and up to three AS x4 flash memories for
use with HPS data storage. The MSEL pins are dual-purpose and operate as MSEL only during POR state. After the FPGA
device enters user mode, you can repurpose the MSEL pins as chip select pins. You must to ensure appropriate chip select pin
connections to the configuration AS x4 flash memory and the HPS AS x4 flash memory. Each flash device has a dedicated
AS_nCSO pin but shares other pins.
3. Intel Agilex Configuration Schemes
UG-20205 | 2019.10.09
Send Feedback
Intel
®
Agilex
™
Configuration User Guide
91
To Next Page
Loading...
