90
No. Item Description
1
Control IP Display current IP that controls the ACU.
2
Current IP Display current IP address.
3
Refresh Rate
Display screen refresh rate and time out.
The screen will not refresh once the time-out shows 0:00.
Exception: If the Refresh Disable Time is set to “OFF” in the
Network Setting page, then the clock will show “--:--“ and
system will keep monitoring all activities regardless of time-
out.
4
Antenna Status Display antenna status.
5
TX Enable
Display whether or not the antenna is able to transmit the data.
6
Signal Level Display current signal level.
7
Edit Enable
Enable to edit the ACU settings. Ensure the check box is
enabled before modifying the settings.
8
Get Antenna Info Obtain current antenna information.
9
Restart Restart antenna system.
10
Setup Enter SETUP mode.
11
Save Satellite
Save current satellite settings.
Bow offset will be adjusted and saved automatically.
12
Backup Backup antenna information to ACU.
13
Restore Restore antenna information from ACU.
14
Logout Logout ACU’s internal HTML page.
15
Antenna Antenna setup menu.
16
Firmware Firmware upgrade menu.
17
Ethernet-to-Serial ACU’s IP address and serial communication setup menus.
1 2 3
4
5 6
7 8 9
10
11 12 13 14
15
16
17
To Next Page
Loading...
Need help?
General
