Intermec EasyCoder PD4 Programmer's Reference Manual

106 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 7—Commands
U – Print Configuration (General)
Description is command is used to print the current printer configuration.
Syntax U
Remarks is command produces a single label identical to the one
printed in the Dump Mode (see Chapter 1), but without enter-
ing the Dump Mode.
Example U↵ :Produces a test label.

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English