114 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 7—Commands
UP – Code Page & Memory Inquiry/Print
Description is command will cause the printer to print and send the cur-
rently selected code page and memory status to the host through
the RS-232 or USB port.
Syntax UP
e printer will:
• Send information on the currently selected code page and
memory status back to the host (same as UM command).
• Print the current printer configuration (same as U command).
e format of the data sent to the host is as follows:
UMp
1
,p
2
,p
3
,p
4
,p
5
,p
6
,p
7
UIp
8
p
9
,p
10
[,p
11
]
Parameters p
1
Image buffer size in kilobytes.
p
2
Total User Flash-memory size for [Form + Graphic + External font +
Asian Font] in kilobytes incl. decimals.
p
3
Form memory used in kilobytes. decimals = forms file counter
p
4
Graphic memory allocation size in kilobytes.
p
5
Graphic file counter.
p
6
External font memory allocation size in kilobytes.
p
7
External font file counter
p
8
Number of data bits.
p
9
Code page.
p
10
Country code.
p
11
Asian Font file flag & used memory in kilobytes;
Annn = Chinese traditional
Bnnn = Chinese simplified
Cnnn = Japanese
Dnnn = Korean
where nnn = memory used in kilobytes for Asian font
Example UP↵ :Returns memory status and current code page
and prints configuration on label.
Also see I, U,UI, and UM commands.
To Next Page
Loading...
Need help?
General
