110 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 7—Commands
UG – Graphics Information Inquiry
Description is command will cause the printer to send information about
graphics currently stored in the printer back to the host.
Syntax UG
Remarks e printer will send the number of graphics and the name of
each graphic to the host through the RS-232 or USB port.
e UG command will be executed directly, without appending
any Linefeed.
Example UG :Returns number of graphics and
all graphic names, for example:
UG001
LOGO
To Next Page
Loading...
Need help?
General
