Intermec EasyCoder PD4 - Fonts; Font Sizes 1-5

130 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 8—Fonts
Resident Fonts
e EasyCoder PD4 printers support upper- and lowercase characters for
font sizes 1-4 and uppercase characters for font size 5. All fonts are non-
proportional. e ASCII value of the different characters is determined
by the I command setting.
203.2 dpi (8 dots/mm) (illustrated in Chapter 8 and 9)
Font Size (dots) Size (points) Characters/inch
1 8 x 12 6 20.3
2 10 x 16 7 16.9
3 12 x 20 10 14.5
4 14 x 24 12 12.7
5 32 x 48 24 5.6
300 dpi (11.81 dots/mm) (not illustrated)
Font Size (dots) Size (points) Characters/inch
1 12 x 20 4 25
2 16 x 28 6 18.75
3 20 x 36 8 15
4 24 x 44 10 12.5
5 48 x 80 214 6.25