Intermec EasyCoder PD4 Programmer's Reference Manual

70 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 7—Commands
GI – Print Graphics Information
Description is command will cause the printer to print a list of all graphics
stored in the user flash memory.
Syntax GI
Remarks e GI command will be executed directly, without appending
any Linefeed.
Hint:
Issue a GI command after having stored a graphic to make
sure the storing was successful and to check the amount of free
graphic memory.
Example GI :Prints graphics list

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English