Intermec EasyCoder PD4 - I - Asian Character Spacing

ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual 77
Chapter 7—Commands
i – Asian Character Spacing
Description is command places an adjustable inter-character space between
Asian font characters. e inter-character spacing gets multiplied
with the text string by the selected font’s horizontal and vertical
multiplier values (See A command).
Syntax ip
1
Parameters p
1
Space in dots between Asian characters (0–9). Default 0
Example i8↵ :Selects an 8 dots spacing between Asian characters.
1 Character
1 Character 1 Character
1 CharacterSpacing
i Command
Parameter p
1
set to 0 (default)
i Command
Parameter p
1
set to 8 (dots)