ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual 109
Chapter 7—Commands
UF – Form Information Inquiry
Description is command will cause the printer to send information about
forms currently stored in the printer back to the host.
Syntax UF
Remarks e printer will send the number of forms stored and the name
of each form to the host through the RS-232 or USB port.
e UF command will be executed directly, without appending
any Linefeed.
Example UF :Returns number of forms and all form names,
for example:
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6