Intermec EasyCoder PD4 Programmer's Reference Manual

ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual 85
Chapter 7—Commands
N – Clear Image Buffer
Description is command is used to clear the image buffer before building
a new image. It also clears any error list that not yet has been
presented.
Syntax N
Remarks e N command is essential when printing labels in the Direct
Mode. It is not necessary to use an N command before printing
a form. An N command must not be used inside a form in the
Form Edit Mode.
Example N↵ :Clears image buffer

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English