Intermec EasyCoder PD4 - GK - Delete Graphics

ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual 71
Chapter 7—Commands
GK – Delete Graphics
Description is command is used to delete a specified graphic or all graphics
from the user flash memory.
Syntax GK"name"|"*"
Parameters "name" By entering a name of a form, that form only will be deleted from memory.
"*" By entering an asterisk (*) as wildcard, all forms will be deleted from the user
flash memory.
Examples GK"LOGO"↵ :Deletes "LOGO"
GK"*"↵ :Deletes all graphics