SECTION 6 " PEN*KEY 6400 Computer
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 6-7
Following are the keys and their descriptions.
Key(s) Description
[SCAN] The scan key enables an integrated scanner to be
operated when this key is pressed.
[ENT] The two enter keys send CR, CR LF, or SS3 M, de-
pending on PEN*KEY computer mode settings.
[.] Types a period.
[--] Types a hyphen.
[0] -- [9] Send numbers 0 through 9 or SS3 p through SS3 y,
depending on how the keypad mode is set.
[¬]
Sends a backspace or a delete key, depending on
how the firmware is set up.
[SHFT] Places the keyboard into green shift mode.
[A] -- [Z] Send letters a through z or A through Z, depending
on how the shift lock is set.
I/O
Suspends and resumes operation.
Four unlabeled keys are in the bottom row of the 51-key
keyboard. Following are the keys’ functions when they are
unshifted (in the primary plane):
" The white key with “CTRL” printed above it is the
Control key ([CTRL]) which, in combination with other
keys, does control functions.
" The white key with “SP” printed above it is the Space
key ([SP)], which types one space.
" The blue key ([BLUE]) places the keyboard into blue
shift mode.
" The gold key ([GOLD]) places the keyboard into gold
shift mode.
To Next Page
Loading...