SECTION 1 " Introduction
1-6 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Access Points and Base Radios
6710 Access Point User’s Guide (961-047-081)
The user guide for the 6710 Access Point describes how to
install, configure, and troubleshoot the access point on the
open wireless LAN.
RB3000 Base Station User’s Guide (962-047-012)
This guide describes how to operate the RB3000 and
RB3001 Base Stations.
RCB4030 Base and Base/Controller User’s Guide
(961-047-075)
The user’s guide for the RCB4030 base describes how the
base operates. The guide also describes how to install the
base, interpret its LEDs, set its switches, and troubleshoot.
Comparing the Keyboards
So that you can compare your wireless station’s keyboard
with the VT220 keyboard, an illustration of the VT220 key-
board has been placed on the next page. As you read how
your wireless station’s keyboard and overlay emulate
VT220 operation, you may want to frequently refer to Fig-
ure 1-1 (standard VT220 keyboard) and the figure in this
publication for the wireless station you are using.
If you are unfamiliar with the location of the keys on the
VT220’s keyboard, study the figure now to learn where the
keys are located and the different parts of the keyboard.
To Next Page
Loading...