SECTION 3 " RT1100 Radio Terminal
3-14 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
To Move Display Press
One space right
[GOLD]+["]
One space left
[GOLD]+[A]
One space up
[GOLD]+[Y]
One space down
[GOLD]+[B]
Eight spaces right
[BLACK]+["]
Eight spaces left
[BLACK]+[A]
Eight spaces up
[BLACK]+[Y]
Eight spaces down
[BLACK]+[B]
Auxiliary Keypad
The VT220 terminal’s auxiliary keypad consists of numeric
keys (which enter numeric data) and programmable func-
tion (PF) keys. The PF keys have operations assigned to
them by the application software in use. Refer to your ap-
plication’s software manual for the programmed uses of the
PF keys.
Table 3-4 describes how to use the radio terminal to do
VT220 terminal auxiliary keypad operations.
Table 3-4
RT1100 Auxiliary Keypad
For Auxiliary Operation Press
0--9 [KEYPAD]+[0] -- [KEYPAD]+[9]
-- (hyphen) [KEYPAD]+[GOLD]+[B]
, (comma) [KEYPAD]+[GOLD]+[M]
. (period) [KEYPAD]+[BLACK]+[U]
Enter [KEYPAD]+[ENTER]
PF1--PF4 [BLACK]+[A] -- [BLACK]+[D]
To Next Page
Loading...