SECTION 3 " RT1100 Radio Terminal
3-10 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Table 3-1 (Continued)
RT1100 Standard Keys
To Type Press
_ (underscore) [GOLD]+[P]
{ (left brace) [GOLD]+[Q]
} (right brace) [GOLD]+[R]
’ (single quote) [GOLD]+[S]
” (double quote) [GOLD]+[T]
\ (backslash) [GOLD]+[U]
= (equal) [GOLD]+[V]
< (less than) [GOLD]+[W]
> (greater than) [GOLD]+[X]
~ (tilde) [GOLD]+[Y]
| (vertical bar) [GOLD]+[Z]
. (period) [BLACK]+[U]
^ (circumflex) [BLACK]+[V]
! (exclamation mark) [BLACK]+[W]
‘ (grave accent) [BLACK]+[X]
[ (left bracket) [BLACK]+[Z]
] (right bracket) [BLACK]+[SP]
Special Function Keys
Table 3-2 describes how to use the radio terminal to do spe-
cial VT220 terminal function operations. Note that the ra-
dio terminal does not support key operation COMPOSE
CHARACTER, which creates characters that do not exist as
standard keys on the VT220 keyboard.
Operation of the delete key depends on how the
PROTOCOL OPTS parameter is set in the radio terminal’s
firmware. The key either sends a delete (DEL, 7F hexadeci-
mal) or a backspace (BS, 08 hexadecimal).
To Next Page
Loading...