SECTION 2 " RT3210 Radio Terminal
2-14 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
To Move Press
One page right
[FUNC]+["]
One page left
[FUNC]+[A]
One page up
[FUNC]+[Y]
One page down
[FUNC]+[B]
Scrolling Through the Display
Use the cursor control key in combination with [ALT] to
scroll through the radio terminal’s display. Each corner of
the diamond moves the cursor in that direction.
To Move Press
One space right
[ALT]+["]
One space left
[ALT]+[A]
One space up
[ALT]+[Y]
One space down
[ALT]+[B]
Auxiliary Keypad
The VT220 terminal’s auxiliary keypad consists of numeric
keys (which enter numeric data) and programmable func-
tion (PF) keys. The PF keys have operations assigned to
them by the application software in use. Refer to your ap-
plication’s software manual for the uses of the PF keys.
Press [FUNC] to lock the radio terminal into auxiliary key-
pad mode. To unlock it, press [FUNC] again. Table 2-4 de-
scribes how to use the radio terminal to do VT220 terminal
auxiliary operations.
To Next Page
Loading...