SECTION 8 " Programming
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 8-47
Define Area Qualification
The define area qualification (DAQ) command indicates
that the active position is the first character position of a
qualified area. The end of a qualified area is indicated by
the beginning of the following qualified area. The qualifica-
tions of the area are specified according to the parameter(s).
Table 8-32 lists qualification sequences.
Table 8-32
Define Area Qualification
Qualification
Sequence and Ps
(Single Parameter) Wireless Station Action
Accept all input CSI 0 o Accepts all input.
Accept no input (protected)
and do not transmit (guarded)
CSI 1 o Accepts no input.
Accept graphics CSI 2 o Accepts graphics.
Accept numerics CSI 3 o Accepts numerics.
Accept alphabetics CSI 4 o Accepts alphabetics.
Right justify in area CSI 5 o Right justifies area.
Zero fill in area CSI 6 o Fills area with zeroes.
Horizontal tab stop at start
of area
CSI 7 o Places a horizontal tab stop
at the start of the area.
Accept no input (protected),
but select for transmission
(unguarded)
CSI 8 o Accepts no input.
Space fill in area CSI 9 o Fills area with spaces.
Invisible CSI 1 0 o Makes passwords invisible.
To Next Page
Loading...