SECTION 7 " PEN*KEY 6500 Computer
7-14 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Top-Row Function Keys
On the VT220 terminal’s keyboard, function keys [F1]
through [F5] are used for hold screen, print screen, set-up,
data/talk, and break. The PEN*KEY computer supports
only the break function, which is [Break] on the PEN*KEY
computer’s keyboard.
Function keys [F6] through [F20] are user-defined keys
(UDKs) that have operations assigned to them by the ap-
plication software in use. Refer to your application’s soft-
ware manual for their programmed uses.
Table 7-5 shows how to perform function operations.
Table 7-5
PEN*KEY 6500 Top-Row Function Keys
To Do Function Press
F5--F10 [F5] -- [F10]
F11--F14 [Blue]+[PF1] -- [Blue]+[PF4]
F15--F20 [Blue]+[F5] -- [Blue]+[F10]
Control Keys
Table 7-6 lists some control key combinations. On the
PEN*KEY computer, the control key is [Blue].
Table 7-6
PEN*KEY 6500 Control Keys
Code Name Keys Action
SOH [Blue]+[A] Start of heading
STX [Blue]+[B] Start of text
ETX [Blue]+[C] Interrupt program
EOT [Blue]+[D] End of transmission
ENQ [Blue]+[E] Enquiry
To Next Page
Loading...