SECTION 6 " PEN*KEY 6400 Computer
6-20 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Table 6-6 (Continued)
PEN*KEY 6400 Auxiliary Keypad
For Auxiliary
Operation 41-Key Keyboard51-Key Keyboard
, (comma) [GOLD]+[0]+
[GOLD]+[T]
[GOLD]+[0]+
[GOLD]+[$]
. (period) [GOLD]+[0]+[.] [GOLD]+[0]+[.]
Enter [GOLD]+[0]+[ENT] [GOLD]+[0]+[ENT]
PF1--PF4 [BLUE]+[A] --
[BLUE]+[D]
[F1] -- [F4]
Top-Row Function Keys
On the VT220 terminal’s keyboard, function keys [F1]
through [F5] are used for hold screen, print screen, set-up,
data/talk, and break. The PEN*KEY computer supports
only the break function, which is [F5] on the PEN*KEY
computer’s keyboard.
Function keys [F6] through [F20] are user-defined keys
(UDKs) that have operations assigned to them by the ap-
plication software in use. Refer to your application’s soft-
ware manual for their uses.
51-Key Keyboard
Table 6-7 describes how to do function operations on the
51-key keyboard.
To Next Page