SECTION 2 " RT3210 Radio Terminal
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 2-15
Table 2-4
RT3210 Auxiliary Keypad
For Auxiliary Operation Press
0--9 [FUNC]+[0] -- [FUNC]+[9]
-- (hyphen) [FUNC]+[--]
, (comma) Not supported
. (period) [FUNC]+[.]
Enter [FUNC]+[ENTER]
PF1--PF4 [FUNC]+[U] -- [FUNC]+[X]
Top-Row Function Keys
Function keys [F1] through [F4] on the radio terminal’s
keyboard are reserved for future expansion. On the VT220
terminal’s keyboard, function keys [F1] through [F5] are
used for hold screen, print screen, set-up, data/talk, and
break. The radio terminal supports only the break func-
tion, which is [FUNC]+[E] on the radio terminal’s keyboard.
Function keys [F6] through [F20] are user-defined keys
(UDKs) that have operations assigned to them by the ap-
plication software in use. Refer to your application’s soft-
ware manual for their programmed uses.
Table 2-5
RT3210 Top-Row Function Keys
To Do Function Press
F5--F20 [FUNC]+[E] -- [FUNC]+[T]
To Next Page